Printing your very own images, pictures, designs or text onto ceramics is easier than you could possibly believe. This article will demonstrate two popular techniques which you can use in your house to transfer images onto ceramic surfaces like plates, mugs and tiles as an illustration.
Method 1 – Using waterslide papers to phone case printer onto ceramics
This is probably the easiest craft projects you may ever do and professional looking results may be expected on your own first attempt.
1 – Purchase some waterslide decal paper. If your ceramic surface is white or even a light colour, choose the clear waterslide decal paper. Alternatively, when your ceramic surface is dark in colour, opt for the white waterslide decal paper. Decal papers are for sale to both inkjet and laser printers and work differently. I shall explain the differences later in this post. A pack of 5 A4 sheets is enough to print pictures onto around 20 ceramic mugs or perhaps 10 plates.
2- Unlock the picture or type your text into Microsoft word or your photo editing software like Photoshop. You have got to size your projects according to your ceramic surface, so for ?nhor1%, you would utilize the top left quarter of the page and print a test with a regular notepad and maybe even cut that out and place onto the mug to actually are content together with the size.
3 – Load your decal paper to your printer so your print lands onto the papers shiny side. Here is the coated side of the paper that is effectively an exceptionally thin film that slides away from the papers backing when water is used later from the production process.
4 – Take your printed picture or text and either make the grade out now or for those who have filled your A4 sheet of decal paper with pictures, let it sit as you piece because it can certainly make the next stage easier.
5 – In case you have purchased inkjet waterslide decal paper, you will also require some clear varnish for the upcoming stage since you will now learn to apply the varnish to the image. Ensure you have either waited no less than a half-hour or used a hair dryer in your print to make certain that they have dried.
6 – Apply 2 to 3 quick, even sprays of varnish over your image, separated by around 10-20 minutes. Usually do not use too much simply because this can harden your decal, making it awkward to use into a curved surface. Pertain to little though and you risk leaving a small area or two for water to engage your print, ultimately causing an ink smudge. In spite of this though, do not over concern yourself with using the varnish as food printer applying this method is very forgiving and pursuing the instructions will offer great results.
7 – Reduce your image out near the edges and place into water. You can utilize your fingers to hold the paper underneath the water and to ensure that is stays flat because it will automatically usually tend to curl up if it hits the water. Again, don’t worry whether it accomplishes this as you can easily flatten it all out again whilst under the water with the fingers.
8 – After around thirty seconds the paper backing will suddenly become loose and simple to slip off. Do not slide them back though yet. Eliminate the ceramic decal through the water and slide off 1 centimetre. Apply the 1 cm of film that you have slide off directly on your ceramic surface, then slide the rest of the paper backing away, so you have your printed film right on the ceramic surface. Gently feather away the liquid beneath the decal along with your fingers taking good care at this time never to tear it.
9 – The decal actually starts to harden very quickly and as soon as dry you can place it in an oven for any further 10 mins at 110c.
10 – Applying another coat of clear varnish will add extra protection to your project. Waterslide decal papers produce an excellent finish for decorative purposes. Hand wash any ceramic 15dexbpky that you just complete and steer clear of placing finished work like ceramic cups and plates into dishwashers.
The main difference between inkjet and laser waterslide decal paper
The 2 decal papers are similar and provide the same desired results, the real difference being that clear acrylic spray / clear varnish is not needed when working with laser waterslide decal paper. You effectively skip steps 5 and 6 above. After you have completed your ceramic project using laser waterslide paper, you can of course apply some clear varnish for additional protection and sturdiness.
Method 2 – Using ceramic paint to utilize your own personal designs to ceramics
In case you have some artistic flair or just want to give ceramic painting a go, begin by acquiring a number of basics like some suitable ceramic paint and brushes. Pebeo and Liquitex are the two leading brands for uv flatbed printer and brush sizes 1 and two round and ¼” flat will be ideal for painting small ceramic tiles as an illustration.
Start with washing your ceramic surface with soapy water, dry and initiate by drawing your design on the ceramic in pencil. Unwanted pencil marks can be taken off using water or painted over. Choose your colours and squeeze to your palette. Ceramic printing paint goes a long way but will also dry quickly so bear this in mind when starting and know of your respective colour scheme before you start.
To blend a colour, apply the lighter colour for the palette first so when you wanted a grey colour, you might apply some white into the palette before adding a tiny amount of dark colour up until you get to the ideal grey. Keep your mixed colours in the event you require them later for finishing touches.
Begin with your lighter colours first and apply one colour at a time. Put a small amount of paint into your palette but take a modest amount on the round brush and paint evenly over the ceramics natural flow. Ceramic paint dries quickly letting you add another coat quite quickly if neccessary.
Use a liner brush (thin brush) for detailed edges. Lighter colours may be painted over whenever you go to painting with the darker colours so don’t panic if you talk about the edges.